Cargobody
Specifications & General Descriptions:
CB8X Longbox & ShortBox Models
- Factory ready, universal slip-on truck body insert(s) for pick-up
truck
vehicle(s).
- A one piece mono-body capsule that has full floor support capable
of
holding
the contents even when it is removed from a vehicle.
- Pre-configured and factory ready for immediate work service in
just
minutes.
- The "Cargobody Quick-Lock System" which is an onboard built-in
four
point
lockdown system that facilitates the quick engagement (2 Min.) to any
host
vehicle. This "Quick Lock System" enables full vehicle installation
without
the requirement of any vehicle modification such drilling holes or use
of bolts and other hardware. (As a result of "Quick Lock System" the
body
is quickly interchangeable other vehicles.)
- On board built-in jack receptacles (4) for optional slip-in jack
stands
for vehicle transfer or stationary use of Cargobody.
- Double rear cargo doors with keyed locking automotive grade slam
shut
latches.
Model Fit:
- GMC/Chevy - Ford - Dodge Universal fit for 8' Long body truck
box.
- (Long Body units are also capable of fit to
short body trucks)
- (Short body models also available)
- Short Body demensions are the same
except body length
is reduced by 16 1/2
inches .
Dimensions: Interior Inches Exterior Inches
|
|
| Overall Length: 107" 108 1/4"
|
| Overall Height: 58" 62"
|
|
- Floor Space (max usable) 99" long 48 1/2" wide
|
| Base Empty Weight: 450 lbs.
|
| Rear Door Opening height 49 1/2" width 49
1/2"
|
| Side Door Opening height 20" width 70"
|
| Compartments & Shelving
height 2" length 72" depth 12" Standard
shelves 3 per assembly
(Height spacing adjustable preset at 12")
|
Main Body Structure:
- CThe
body is
constructed
of fiberglass with a glass to resin ratio of 30:70 or ratio.
- CThe
body is
approximately
.220" thick constructed using fiberglass mat lamination.
- CAll
core
material sandwiched
between two layers of glass and resin. Resin type, neat. (No fillers)
- COutside
finish with an automotive
paint.
- CInside
finish white
gel-coat with an automotive finish for added interior brightness.
Standard Hardware
& Components: High quality corrosion resistant
hardware & components:
Rear access swing shut
doors:
Material /Construction
| One piece double walled door |
CLaminated
Fiberglass (no fillers) |
| Reinforced with a minimum of |
C40%
glass
content |
| Outer access door paddle handle. |
CStainless
Steel |
| Handle security |
CKey
lock
w/interior engagement |
| Inner access door paddle handle |
CStainless
Steel |
| Rear door hinges (size 3" tall) |
CStainless
Steel |
| Rear door stoppers (plunger type) |
CStainless
Steel |
| Door latch operation adjustable |
CStainless
Rods |
| Door seals |
CBulb
type
(Automotive) |
|
|
Side access swing shut door(s):
| Handle security |
CKey
lock
w/ interior button |
| Access door paddle handle |
CStainless
Steel |
| Door latch operation adjustable |
CStainless
Rods |
Electrical:
| Seven pole power junction box |
CHigh
impact
plastic |
| Power access cables |
C14
Gauge.
4 wire |
| 12V Auxiliary power (interior) |
CAll
weather
receptacle |
| High mounted third brake light |
CRecessed
LED high impact plastic |
| Interior dome lights (2) |
CMarine
switch
at rear door |
| Double walled floor 1 1/4" thick |
CMulti
core
ply fiberglass floor |
| Interior rubber floor covering |
CSkid
resistant
grooved rubber |
Compartments & Shelving:
| Laser cut (non bur) shelving |
CGalvanized
heavy gauge steel |
| Laser cut shelving dividers each 4" |
CGalvanized
heavy gauge steel |
| Shelving liners |
CSkid
resistant
grooved rubber |
Roof Rack & Ladder Fastners:
| Griplock ladder racks |
CAll
aluminum |
| Coating |
CPowder-coated
white |
| Hardware |
CStainless
steel |
| Critical Parts |
CMade
of Extruded
Aluminum |
For more detailed information contact Cargobody Intl. toll free
1-888-321-2330